Los Angeles & Southern California
What Our Technicians Carry to Every Job (And Why Each Item Is There)
Equipment Breakdown
When a Skyworks Unlimited crew van pulls up to a commercial building in Long Beach, a corporate campus in Beverly Hills, a high-rise in Downtown Los Angeles, or a residential property in Pasadena, the equipment loaded in that van tells the story of the company before a single window is touched. Every professional window cleaning and rope access crew in Los Angeles and Southern California that actually delivers what a certified exterior maintenance specialist is supposed to deliver carries a specific set of equipment — seven distinct categories, each with a clear purpose, none of which can be substituted or omitted without degrading either the safety of the work or the quality of the result. This is the complete breakdown of what Skyworks Unlimited technicians carry to every commercial and residential job across Los Angeles County, Orange County, and Southern California — and the specific reason every item is on the truck. It is also a transparency exercise: the companies that cannot produce this list, or who carry a fraction of it, are telling you something important about what they actually deliver — and what they do not.
7
distinct equipment categories carried to every Skyworks Unlimited job — from rope access systems to condition documentation
90+
individual equipment check points completed during pre-use inspection before any crew departs for a job site in Los Angeles or Southern California
0 ppm
target TDS reading on the purified water system before departure — confirmed by inline meter, not assumed
Every
item on this list is present on every job — residential or commercial, Signal Hill or Santa Monica, single floor or high-rise tower
The equipment list below is the operational version of the professional standard Skyworks Unlimited describes in our contractor vetting guide for Los Angeles property managers. Read both together to understand not just what to ask a window cleaning company — but what to expect to see when they arrive.
Category 01 — Rope Access & Fall Protection Cal/OSHA + SPRAT Mandatory
Every item in this category is required by Cal/OSHA Title 8 for suspended work at height in California, and by SPRAT and IRATA standards for rope access operations. A company working above boom-lift range on commercial buildings in Los Angeles, Signal Hill, Long Beach, or anywhere in Southern California without every item in this category present and pre-inspected is non-compliant — and the liability for that non-compliance does not stay with the contractor.
Kernmantle Work Rope — EN 1891 Type A
Why it’s there
The primary descent line — the rope the technician descends on to reach every glass panel above boom-lift range on a Los Angeles commercial building. Dynamic kernmantle construction absorbs shock loads without transmitting them fully to the technician or the anchor. Every rope is individually serial-tracked, logged by hours of use, and retired at the first sign of damage or at the manufacturer’s service life limit — whichever comes first.
Inspection: pre-use visual and tactile check by assigned technician + annual third-party review. Retirement: on any observed damage or at service limit.
Independent Safety Rope with Fall-Arrest Device
Why it’s there
The second rope — entirely independent from the work rope and attached to a separate anchor point. The safety rope carries an automatic fall-arrest device (rope grab) that engages if the work rope or descender fails. This is the item that makes rope access a two-rope system and not a one-rope system. It is the difference between a single-point-of-failure access method and a redundant safety-first system. SPRAT and Cal/OSHA both require a two-rope system; a company working without an independent safety rope on a Los Angeles commercial building is non-compliant, period.
The safety rope is pre-rigged to its anchor before the work rope is loaded. It is never the same anchor as the work rope.
Full-Body Harness — EN 361
Why it’s there
The interface between the technician and the rope system — distributing any fall arrest load across the torso, shoulders, and thighs rather than concentrating it at a single point. Full-body harnesses are individually assigned, tagged with the technician’s name and last inspection date, and visually and tactilely inspected at every pre-use check. Any harness with stitching damage, webbing wear, buckle deformation, or hardware corrosion is removed from service before the job starts — not after it is noticed on the rope.
Harnesses are inspected pre-use by the assigned technician and annually by a qualified inspector. Retirement on any damage finding.
Descender Device — Load-Rated, Hands-Free Locking
Why it’s there
The device that controls the technician’s descent rate on the work rope — allowing precise position control, hands-free locking at any point in the descent so both hands are free for cleaning work, and the ability to ascend back up the rope when needed. The descender is individually serial-tracked and inspected for cam wear, housing damage, and rope-grip function before every use. On a Beverly Hills luxury tower or a Long Beach commercial building, the descender is the mechanical interface between the technician and their position — it has to work perfectly, every time.
kN-rated. Pre-use cam and housing inspection. Lubrication schedule logged. Retired at first sign of cam wear or housing deformation.
Rated Carabiners & Anchor Slings
Why it’s there
The connection points between the ropes and the anchors, and between the harness and the rope system. Every carabiner on a Skyworks Unlimited project is individually kN-rated, pre-use inspected for gate function and lock operation, and retired at any sign of gate deformation, corrosion, or cross-loading damage. Anchor slings — the loops of rated dyneema or nylon webbing that connect the rope to the anchor point — are matched to the specific anchor geometry and load angle of each descent position and inspected for UV degradation, cut damage, and webbing integrity before each use. In Los Angeles’s coastal environment, carabiner corrosion from salt aerosol is a real maintenance concern; every piece of hardware is rinsed and inspected after coastal projects.
All carabiners kN-rated and CE/UIAA marked. Slings rated to anchor-specific load angles.
Mobile Anchor Systems
Why it’s there
Many Los Angeles commercial buildings — particularly in Torrance, Culver City, and the broader South Bay — have fixed BMU (building maintenance unit) anchor sockets on some elevations but not others. Mobile anchor systems — certified structural anchors that can be rigged to rated building structural elements — extend rope access coverage to any elevation of any building regardless of whether fixed anchor infrastructure is present. They are load-tested on-site before any descent is made from them, and the load-test result is documented in the project’s hazard assessment record. Without mobile anchor systems, a rope access company in Los Angeles is limited to buildings with complete fixed anchor infrastructure — which excludes a significant portion of the commercial real estate market.
On-site load test before use. Structural attachment verified by Level 3 Supervisor.
Category 02 — Purified Water System The Most Visible Quality Differentiator
The purified water system is the single equipment item that most directly determines whether the windows on a Los Angeles or Long Beach commercial building will look spotless after professional cleaning — or whether they will re-spot within 48 hours from the mineral content of Southern California’s tap water supply. Every company that does not carry a purified water system to their jobs in Los Angeles is guaranteeing their clients a re-spotted result. Every company that does carry one is not — provided the system is maintained correctly and the output is confirmed before use.
Deionized or Reverse-Osmosis Water Tank
Why it’s there
The water that rinses every exterior glass surface on every Skyworks Unlimited job across Los Angeles, Long Beach, Santa Monica, Pasadena, Signal Hill, and throughout Southern California — zero dissolved minerals, zero re-spotting, spot-free results that hold for the full contracted cleaning interval. Southern California’s municipal water supply carries significant calcium carbonate and magnesium dissolved mineral content from both the Colorado River import system and local groundwater. When tap water is used for a window rinse and evaporates under Southern California’s UV, those minerals deposit directly on the glass surface. Purified water has no minerals to deposit. The window that was cleaned stays clean.
Tank capacity sized to project scope. Filled from deionization or RO filter system at staging facility. Never filled from job site hose bib.
Inline TDS Meter (Parts Per Million Monitor)
Why it’s there
The TDS (total dissolved solids) meter is what confirms the purified water system is actually producing zero-mineral water — not just what the company says it is doing. Before any exterior glass rinse begins on a project in Beverly Hills, Long Beach, Torrance, or anywhere across the Skyworks Unlimited service area in Southern California, the inline TDS meter reads the output of the water system and confirms a target of 0 to 10 ppm TDS. If the reading is above that threshold, the filter system is checked and the output is not used until it falls within range. A company that tells you they use purified water but does not carry a TDS meter to confirm it is not verifying their own process — and neither can you.
Target: 0–10 ppm TDS output. Read confirmed and documented before use on every job.
Water-Fed Pole System (WFP)
Why it’s there
A telescoping water-fed pole that delivers purified water through soft brushes to accessible glass from ground level — used on low-rise and accessible commercial and residential properties in Los Angeles where ladder or rope access is not required but purified water delivery to the glass surface still is. The WFP system allows efficient, streak-free cleaning of accessible glass at heights up to approximately four to five stories without ladder setup or rope system rigging, making it the most efficient access method for low-rise residential and commercial glass across the Skyworks Unlimited service area when building height does not require rope access.
Carbon fibre telescoping pole. Purified water delivery only — never connected to site tap supply.
Category 03 — Chemical Treatment Kit Soiling-Specific — Not Generic
The chemical treatment kit is where most general window cleaning companies in Los Angeles reveal their limitations — they carry one solution for all glass conditions, which produces one result regardless of what the glass actually has on it. Skyworks Unlimited carries a staged chemical kit that addresses the specific soiling types found on Southern California commercial and residential glass, each applied only after the relevant soiling type has been identified in the pre-clean assessment.
Buffered Phosphoric Acid — Stage 2 Mineral Treatment
Why it’s there
The treatment compound for Stage 2 chemically bonded mineral deposits — the calcium carbonate and magnesium scale that forms on glass in Los Angeles, Long Beach, Seal Beach, and throughout Southern California from irrigation overspray, coastal salt aerosol, and construction site water. Buffered phosphoric acid dissolves the calcium silicate bond between the mineral deposit and the glass surface without etching the glass itself — at the correct concentration and dwell time. Applied only after Stage 2 bonding is confirmed in the pre-clean assessment; never used as a default cleaning agent on glass that does not require it.
pH-tested before use. Concentration staged by bonding severity observed at each panel. Neutralised with purified water rinse after treatment.
Alkaline Degreaser — Smog Film and Hydrocarbon Particulate
Why it’s there
The treatment compound for the hydrocarbon-salt composite film that accumulates on freeway-adjacent commercial glass in Los Angeles — the smog particulate from the 405, 110, 710, and 101 corridors that bonds to coastal salt film and resists standard water-and-squeegee technique. Alkaline degreaser breaks the hydrocarbon bond in the composite at the molecular level, lifting the smog film from the glass surface so the standard cleaning sequence can remove it cleanly. Used on west-facing elevations of commercial buildings in Los Angeles, Torrance, Culver City, and any property within the smog deposition zone of a major freeway corridor.
pH 10.5–11. Dwell time matched to soiling severity. Fully rinsed before standard cleaning sequence continues.
Enzyme-Based Biological Cleaner — Bird Guano Treatment
Why it’s there
The treatment compound for bird guano accumulation on glass and ledge surfaces of commercial buildings — particularly relevant on Long Beach, Bixby Knolls, and coastal Los Angeles buildings where pigeon and waterbird activity on upper-floor ledges produces heavy guano deposits on adjacent glass. Enzyme cleaner is applied and allowed full dwell time to break down the biological material at a microscopic level before any physical removal motion begins — the step that prevents dry guano crystals from being dragged across the glass surface and producing scratches. Never skip the dwell time on bird guano treatment; the enzyme needs time to work, and working without it causes the damage it was brought to prevent.
Full dwell time always observed before any physical cleaning motion. Applied before standard cleaning sequence at affected panels.
Adhesive Solvent — Film Residue and Construction Adhesive
Why it’s there
The treatment compound for adhesive residue — from protective films left on new construction glass, tape masking used during adjacent construction activity, label stickers from glass manufacturing, and construction adhesive contamination from nearby work on new construction projects in Los Angeles. Adhesive residue that is spread across the glass surface rather than dissolved and removed becomes a larger soiling problem than the original deposit — adhesive solvent dissolves the adhesive bond before it is physically removed, preventing spreading. Isopropyl alcohol, acetone, or specialised adhesive remover matched to the specific adhesive type identified in the pre-clean assessment.
Solvent type matched to adhesive chemistry at assessment. Never applied without identifying adhesive type first.
Neutral pH Glass Cleaner — Interior and Standard Exterior Glass
Why it’s there
The standard cleaning solution for interior glass and for exterior glass that has been pre-treated and is now ready for the standard sequence — a neutral pH, surfactant-based commercial glass cleaner that removes standard soiling (interior fingerprints, organic film, dust, and non-mineral exterior particulate) cleanly and without residue. Streak-free formulation with rapid evaporation characteristics appropriate for Southern California’s warm, low-humidity climate. Used on every interior glass panel on every project across Los Angeles County, Orange County, and Southern California — from a single-family residential home in Santa Monica to a twenty-story commercial tower in Downtown LA.
Neutral pH — safe for all glass coatings including low-E and anti-reflective. Streak-free formulation confirmed by blind panel test on new batches.
Category 04 — Professional Cleaning Tools Professional Grade — Not Hardware Store
The difference between professional-grade window cleaning tools and hardware store equipment is visible in the result — in streaking patterns, in the completeness of the cleaning path across large commercial glass panels, in the ability to work efficiently on a rope without dropping or repositioning tools repeatedly. Every tool Skyworks Unlimited technicians carry is professional-grade, maintained, and appropriate for the specific glass type it is being used on.
Professional Squeegees — Multiple Sizes, Replaceable Rubber
Why it’s there
The primary tool for removing cleaning solution and purified rinse water from exterior glass — producing the streak-free, dry result that characterises professional window cleaning. Professional squeegees use high-grade rubber blades that are replaced at the first sign of nicking, curvature loss, or reduced wipe quality. Multiple sizes — from 6-inch for narrow panels and detail work to 18-inch or larger for wide commercial glass — allow efficient one-pass cleaning across different panel dimensions. The squeegee is never dragged across glass with dry or contaminated rubber — the blade is wiped and checked between every panel on a rope access descent.
Rubber replaced at nicking or performance decline. Channel alignment checked before each descent session.
Microfibre Cloths — Interior Glass, Frames, and Detail Work
Why it’s there
Lint-free, non-abrasive microfibre cloths for interior glass cleaning, frame and sill wiping, and detail work in corners and edge zones that a squeegee cannot cleanly reach. Microfibre is the correct tool for interior glass because it picks up and holds soiling rather than redistributing it — and on solar screens, anti-reflective coated glass, and any specialty glass surface, it is the only appropriate mechanical contact tool. Skyworks Unlimited uses commercial laundry-cleaned microfibre on every project — not kitchen cloths or paper towels, which leave lint, fibres, and abrasion trails on coated glass surfaces.
Commercially laundered between every use. Separate cloths for glass surfaces vs. frames and sills — never cross-contaminated.
Soft-Bristle Applicator Brushes — Solution Application
Why it’s there
Professional soft-bristle applicator tools and washers for applying cleaning solution across the glass surface before squeegee removal — agitating the solution into contact with soiling for maximum cleaning efficiency. Soft-bristle brushes are used for screen cleaning, for pre-treatment agitation on heavily soiled glass, and for track and sill cleaning where a microfibre cloth cannot reach. Never wire brushes or abrasive scrubbers anywhere near glass — those are the tools that produce the scratches that turn a window cleaning engagement into a glass damage claim.
Soft natural or synthetic bristles only. Abrasive tools never permitted on glass or screen surfaces.
Category 05 — Condition Documentation Kit Every Project — Every Visit
The documentation kit is the equipment category that most clearly separates Skyworks Unlimited from standard window cleaning companies across Los Angeles and Southern California — because most window cleaning companies do not carry a documentation kit at all. The written condition report that Skyworks Unlimited delivers at every project close is not drafted from memory at the office the next day. It is built from real-time observations recorded at the glass, in the field, during the project.
Dedicated Project Camera
Why it’s there
Every significant condition finding during a Skyworks Unlimited project — caulk failure, mineral etching, failed glass seal, bird activity, frame corrosion — is photographed at the moment of observation, from the closest practical distance to the condition, with enough context to identify the exact panel and floor location. These photographs are what make the written condition report a document that property managers in Los Angeles, Long Beach, Torrance, and throughout Southern California can act on — not a list of vague observations. A finding that is described in text and shown in a photograph is a finding that can be immediately assessed, scheduled, and addressed. A finding that is described in text only is a finding that requires another site visit to confirm before anyone can act on it.
Photos geotagged and timestamped where possible. Stored in project file referenced to condition report line items.
Condition Report Template — Project-Specific
Why it’s there
The written framework into which every field observation from the project day is entered — elevation by elevation, floor by floor, condition by condition — with severity classification (Monitor, Schedule, Priority, Immediate) and recommended action for each finding. The condition report template is loaded for the specific building being serviced today, referencing the prior visit’s findings so that any progression in a previously noted condition is immediately visible in the comparison. The report that leaves the job site at 4 PM is complete, structured, and actionable — not a handwritten note on a clipboard that gets transcribed three days later.
Project-specific template generated from prior visit record. Delivered before crew departure. Never emailed days later.
Category 06 — Site Safety & Ground Management Ground-Level Protection
Rope access safety is not only about what happens at height — it is equally about what is controlled at ground level below every descent position. Every Skyworks Unlimited project in Los Angeles, Long Beach, Lakewood, West Hollywood, and across Southern California includes a documented ground exclusion zone management plan and the physical equipment to implement it.
Ground Exclusion Zone Equipment — Cones, Signage, and Tape
Why it’s there
Physical barricade equipment — traffic cones, exclusion zone tape, and warning signage — that establishes and marks the ground-level area below every active rope access descent position on a Los Angeles or Long Beach commercial building. The exclusion zone prevents pedestrian or vehicle entry into the area directly below any technician working at height — the zone where any dropped tool or equipment failure could present a ground-level hazard. The size of each exclusion zone is calculated based on the working height, the building’s setback, and the ground-level activity pattern observed in the pre-project hazard assessment.
Exclusion zone size calculated per working height. Established and confirmed by Level 3 Supervisor before first descent. Maintained throughout project duration.
Crew Communication Devices
Why it’s there
Two-way radio or equivalent communication between the technician on the rope and the ground-level team member managing the exclusion zone and monitoring descent position — essential for real-time coordination on multi-story descent sequences, for emergency communication if a technician needs assistance, and for coordinating the transition between elevations and access methods across a full project day. In a city like Los Angeles where commercial building sites are embedded in active urban environments, ground-to-height communication is not a luxury — it is a basic operational safety requirement that a professional rope access team treats as non-negotiable.
Confirmed operational before first descent. Backup communication plan confirmed at daily brief.
Category 07 — Personal Protective Equipment Worn on Every Project — No Exceptions
PPE in rope access and professional exterior maintenance is not optional, not situational, and not subject to individual technician discretion. It is worn on every project, every day, without exception — and it is the final layer of protection after all engineering controls and procedural safeguards have been implemented.
Chemical-Resistant Gloves
Why it’s there
Protection during chemical treatment application — acid, degreaser, enzyme, and solvent are all present in the Skyworks Unlimited treatment kit, and each is harmful to skin on direct sustained contact. Chemical-resistant gloves are worn during any chemical application step and during acid treatment specifically — with nitrile or neoprene construction appropriate to the chemical pH range being handled. Changed between chemical types where cross-contamination would compromise the treatment sequence. Not standard latex gloves — those do not provide adequate resistance to the acid and alkaline compounds used in professional-grade glass treatment.
Nitrile or neoprene by application. Changed between incompatible chemical applications.
Eye Protection — Impact and Chemical Splash Rated
Why it’s there
Impact-rated and chemical splash-rated eye protection worn during any chemical application, during any at-height work where debris from the building surface may be dislodged, and during pressure washing operations. At height on a Los Angeles commercial building, dislodged mineral scale, paint chips, dried bird guano, and metal oxidation particles are all potential ocular hazards during the cleaning sequence. At ground level during pressure washing, chemical droplets from the rinse sequence are a splash hazard. Eye protection appropriate to the specific hazard — safety glasses for impact, chemical-rated goggles for acid and alkaline application — is worn without exception.
ANSI Z87.1 impact rated. Chemical splash rating for acid and alkaline application steps.
Non-Slip Safety Footwear
Why it’s there
Steel-toed, non-slip sole safety footwear for every technician on every Skyworks Unlimited project across Los Angeles, Long Beach, Signal Hill, and Southern California — providing impact protection on any tool drop at ground level, slip resistance on wet surfaces during setup and project close, and the stable foot position on the building’s exterior surface that rope access positioning at height requires. On a wet Los Angeles building roof after a January rain event, non-slip footwear is the difference between safe anchor rigging and a ground-level slip incident before the first descent even begins.
ASTM-rated impact protection. Non-slip sole confirmed for both wet and dry roof surface conditions.
What to Verify When Any Window Cleaning Crew Shows Up to Your Property in Los Angeles or Southern California
The equipment list above is not a Skyworks Unlimited exclusive — it is the standard that every professional exterior maintenance company in Los Angeles, Long Beach, Pasadena, Beverly Hills, and Southern California should be meeting. Here is the property manager’s quick verification checklist for any window cleaning crew arrival.
✅ Property Manager’s Crew Arrival Equipment Verification Checklist
Two-rope system visibly present — work rope and independent safety rope, both deployed before first descent. One rope only = non-compliant.
TDS meter reading confirmed before exterior glass rinse begins — the number on the meter is what the water purity actually is, not what the company told you.
Chemical kit present and labelled by type — a single bottle of general window cleaner is not a professional treatment kit for a Southern California commercial building.
Ground exclusion zone established before first descent — cones and signage in place, not set up after the technician is already in the air.
PPE worn by all technicians before work begins — gloves and eye protection during any chemical application, safety footwear throughout.
Documentation kit present — camera and condition report template, not just a squeegee and a bucket.
Level 3 Supervisor identified and on-site — for any rope access project in Los Angeles or Southern California, the most qualified person on the crew must be physically present before any descent begins.
⚠️ The equipment absence that most commonly signals a non-professional window cleaning company in Los Angeles: No purified water system. If the crew rinses your exterior glass with a garden hose connected to the building’s hose bib — using Los Angeles or Long Beach tap water with its full mineral content — the windows will re-spot within 24 to 48 hours under Southern California’s UV. This is the single most visible quality failure in commercial window cleaning across the LA market, and it is entirely preventable with the right equipment.
Professional Equipment. Every Job. Across Los Angeles & Southern California.
Skyworks Unlimited arrives at every commercial and residential project across Los Angeles, Long Beach, Signal Hill, and throughout Southern California with every item on this list — no exceptions, no partial kits, no improvisation. The same professional equipment standard on a single-family home in Rossmoor as on a 10-story commercial building in Downtown Long Beach.
Frequently Asked Questions
Common questions from Los Angeles and Southern California property managers about professional window cleaning equipment.
What equipment does a professional commercial window cleaning company use in Los Angeles? ▾
A professional commercial window cleaning company in Los Angeles carries seven categories of equipment: SPRAT or IRATA certified rope access equipment for at-height work; a purified deionized or RO water system for all exterior glass rinses; a residue-specific chemical treatment kit covering Stage 2 mineral acid treatment, alkaline degreaser, enzyme biological cleaner, and adhesive solvent; professional squeegees, applicators, and microfibre tools; PPE including gloves, eye protection, and safety footwear; a condition documentation kit with camera and written report templates; and ground exclusion zone safety equipment with crew communication devices. A company without all seven categories is not delivering professional-grade commercial window cleaning. Read our complete contractor vetting guide.
Why do professional window cleaners in Los Angeles use purified water instead of tap water? ▾
Los Angeles and Southern California tap water contains significant dissolved mineral content from the Colorado River import system and local groundwater. When tap water is used for the final rinse on exterior glass in LA or Long Beach, those minerals deposit directly on the glass surface as the water evaporates under Southern California UV — producing visible spotting within 24 to 48 hours of the clean. Professional window cleaning uses deionized or RO purified water — zero dissolved minerals, zero re-spotting, results that last the full contracted cleaning interval. Read our hard water window stains guide for the full mineral staging framework.
What is a rope access two-rope system and why is it required in Los Angeles? ▾
A two-rope system consists of an independent working rope and a separate safety rope, each attached to separate anchor points. The safety rope carries an automatic fall-arrest device that engages if the working rope or descender fails — eliminating single-point-of-failure risk. SPRAT, IRATA, and Cal/OSHA Title 8 all require a two-rope system for rope access operations in California. Skyworks Unlimited uses a two-rope system on every rope access project across Los Angeles, Long Beach, Signal Hill, Beverly Hills, and throughout Southern California — with the system documented in the pre-project hazard assessment before first descent.
Does Skyworks Unlimited carry all of this equipment to residential window cleaning jobs in Los Angeles, or just commercial? ▾
Yes — every item on this list is present on every Skyworks Unlimited project, residential or commercial. The same purified water system, chemical treatment kit, documentation equipment, PPE, and rope access gear that arrives at a 10-story commercial building in Long Beach arrives at a single-family home in Pasadena or a residential property in Santa Monica. The professional standard does not scale down based on project size. Contact the team at (562) 291-7549 for a free assessment at your Los Angeles residential or commercial property.
Every Item on This List. Every Job. Across Los Angeles and Southern California.
Skyworks Unlimited arrives at every commercial and residential project with the complete professional equipment standard described above — free site assessment, written quote, full documentation package, and written condition report at close. No bucket-and-ladder improvisation.
Request Your Free Quote Or call the team: (562) 291-7549Tags & Keywords:
#ProfessionalWindowCleaning #RopeAccessEquipment #LosAngeles #LongBeach #SignalHill #SkyworksUnlimited #WindowCleaningEquipment #SPRATCertified #PurifiedWater #CommercialWindowCleaning #BehindTheTeam #ProfessionalEquipment #SouthernCalifornia #ExteriorMaintenance #WindowCleaningTools
